Can you paint brick exterior?

You can paint a brick exterior. It is important to properly prepare the surface and choose the appropriate type of paint.

This involves cleaning the bricks, repairing any cracks or damage, applying a primer specifically designed for masonry surfaces, and using a high-quality acrylic latex paint that is suitable for exterior brick surfaces.

Keep in mind that once you paint your brick exterior, it will require regular maintenance and repainting to keep it looking fresh and protected.

This article will provide valuable insight into how to paint your brick house so that you can experience beautiful results that last for years to come.

george nicola

By George Nicola (Expert Stager)

Table of Contents

When considering painting your brick home, it is important to take into account all of the necessary components needed for success, including selecting the correct surface preparation materials as well as choosing quality paint products from trusted manufacturers.

Furthermore, proper application techniques are essential for achieving optimal coverage and longevity of color.

With these tips in mind, readers will have knowledge on how best to tackle their own painting projects with confidence.


Painting a brick house is an art form that requires precision, attention to detail, and intense focus. With the wrong technique or color palette, even the most beautiful of homes can be ruined in mere minutes. As such, it’s essential for homeowners and real estate agents alike to understand how best to paint a brick house to ensure their investment shines and continues to do so for years.

The process of painting a brick home begins with preparation—the more time spent on this portion of the job, the better the finished product will be. The first step is cleaning the surface with detergent and water; from there it needs to dry completely before being coated in primer.

Play Video about Acrylic latex paint

Once that has been completed, two coats of acrylic latex exterior masonry paint should be applied using high-quality brushes or rollers designed specifically for outdoor use.

When choosing colors for your project, look at existing architecture nearby as well as surrounding landscapes; choose shades that complement one another rather than clash or compete. 

Avoid too much contrast between trim and siding colors: if you have light walls and dark shutters, consider swapping them out for something softer and subtler.

By following these tips you’ll achieve a stunning result that brings out both the beauty of your property’s exterior structure while also blending seamlessly into its surroundings.

We can help you establish if you need full service design or just advice. Free interior design consultant >

Do various colors of brick facades necessitate distinct painting techniques?

painting black brick facade
painting black brick facade

Red, black, white, grey or any other brick color of the facade does not necessarily require different painting techniques.

However, there are some factors to consider when painting bricks with different colors:

1. Primer: It is essential to use a masonry primer that helps in creating an even base for the paint, regardless of the brick’s color. A tinted primer can be used if the paint color is significantly different from the original brick color.

2. Paint Color: If you are painting over dark brick with a lighter paint color, it may require more coats of paint to achieve full coverage and an even finish. In this case, using a tinted primer can help reduce the number of coats needed.

3. Paint type: Regardless of the brick’s color, always use high-quality acrylic latex paint specifically designed for exterior masonry surfaces.

4. Technique: The technique remains consistent across all colors – clean and repair any damage on bricks before applying primer and then paint evenly using either brush or roller.

Overall, while various colored facade bricks don’t entail special techniques per se, considering these factors will ensure a successful outcome in your painting project.


When it comes to painting a brick house, having the right materials is essential.

At a glance: When selecting paint for a brick surface, choose an exterior latex-based paint with a satin or semi-gloss finish. This will provide the best protection against harsh weather and still look attractive.

For application of the paint, brushes are great for getting into small crevices and around corners, while rollers work well on large flat surfaces.

To ensure that dirt and grease buildup doesn’t interfere with proper adhesion of the paint, use a suitable cleaning solution before starting any project.

Acrylic latex paint
Acrylic latex paint

1.Exterior latex-based paint:

Types: Acrylic and vinyl-acrylic latex paints are both suitable for brick surfaces.

  • Acrylic latex paint provides better durability, adhesion, and color retention compared to vinyl-acrylic latex paint.
  • Vinyl-acrylic latex paint is more budget-friendly but may require more frequent repainting due to lower resistance to harsh weather conditions.


  • Excellent adhesion on brick surfaces
  • Good flexibility, allowing the paint film to expand and contract with temperature changes without cracking or peeling
  •  Water-resistant and breathable properties prevent moisture from being trapped inside the bricks
  • Easy cleanup with soap and water


  • Longer drying time compared to oil-based paints
  • May not adhere well if applied over existing oil-based painted surfaces (a proper primer can solve this issue)
Epoxy-based brick primers
Epoxy-based brick primers

2. Masonry primer:

Types: There are several types of masonry primers designed for brick surfaces, including acrylic-latex primer, alkali-resistant primer, and epoxy-based primers.

  • Acrylic-latex primer: Suitable for most brick applications; easy application and clean-up; good adhesion; allows breathability of bricks.
  • Alkali-resistant primer: Ideal for new or bare masonry surfaces where high alkalinity is present; prevents efflorescence (white salt deposits).
  • Epoxy-based primers: Provide excellent bonding strength and durability but may be less breathable than other options; best suited for industrial or commercial settings where extreme wear resistance is required.
Natural bristle brushes
Natural bristle brushes

3. Brushes:

Types: Natural bristle brushes (e.g., China bristle) or synthetic brushes (nylon/polyester blend)

  •  Natural bristle brushes work well with oil-based products but aren’t recommended for use with water-based paints because they can absorb water and become less effective.
  • Synthetic brushes are suitable for both water-based and oil-based products, providing a smooth application and easy clean-up.
Brick paint rollers
Brick paint rollers

4. Rollers:

Types: Short-nap rollers (3/8 – 1/2 inch) or medium-nap rollers (1/2 – 3/4 inch)

  • Short-nap rollers provide a smoother finish on relatively even surfaces.
  • Medium-nap rollers offer better coverage on rougher brick surfaces with deep mortar joints.


  • Faster application than brushes
  • Suitable for large flat areas


  • May not reach small crevices or tight corners as effectively as brushes
Trisodium Phosphate
Trisodium Phosphate

5.Cleaning solution:

Types: TSP (Trisodium Phosphate) cleaner, mild detergent, or specialized masonry cleaners

  • TSP is an effective heavy-duty cleaner but requires proper handling due to its caustic nature; always wear gloves and goggles during use.
  • Mild detergent mixed with warm water can be used for lighter cleaning tasks without causing damage to the brick surface.
  • Specialized masonry cleaners are designed specifically for brick surfaces and may target specific issues like efflorescence, mold/mildew, or rust stains.

6.Safety equipment:

  • Goggles: Protect your eyes from debris, dust particles, chemicals, or paint splatters during the preparation and painting process. Look for goggles that fit comfortably over glasses if needed and have anti-fog features to maintain clear vision when working.
  • Gloves: Wear chemical-resistant gloves when handling cleaning solutions, primers, or paints to protect your skin from irritants. Choose gloves made of materials such as nitrile or latex that provide adequate dexterity while working with tools and equipment.


brick facade preparation before painting
brick facade preparation before painting

Preparing a brick house for painting can be intimidating, but with the right strategies and materials it’s possible to achieve great results.

To get started, it’s important to thoroughly clean the brick surface by using a pressure washer or wire brush. Removing any loose paint chips will help ensure that the new coat of paint adheres properly.

Make sure to use painter’s tape to protect surfaces from potential drips of paint and other mishaps. If you’re concerned about splattering your landscape, cover nearby plants with a tarp before starting the job.

With everything in place, you’ll be ready to begin working on your project!

Preparing The Surface

At a glance these are the key points specific to preparing the surface of a brick house before priming and painting:

  • Clean the surface: Use a pressure washer or a stiff-bristle brush with soapy water to remove dirt, grime, mold, and mildew from the exterior of the house. Make sure to rinse thoroughly with water.
  • Repair damage: Inspect the brick surface for any cracks, chips, or other damages that need repair before applying primer. Use mortar or patching compound to fill in any gaps or cracks and allow it to dry completely.
  • Remove loose paint: If there is old paint on your brick surface, use a scraper, wire brush, or sandpaper to remove any loose or peeling paint.
  • Sand rough edges: Smooth out any rough patches using medium-grit sandpaper to create an even base layer for better adhesion of primer and paint.
  • Protect windows and fixtures: Cover windows, doors, vents, light fixtures and other features with painter’s tape and plastic sheeting to prevent accidental splatters during priming and painting.
  • Allow time for drying: After cleaning and repairs are completed, let the brick surface dry completely before proceeding with priming.

By following these steps when preparing your brick house exterior for priming and painting, you’ll ensure that the final result is smooth and long-lasting.

Clean the surface:

  • Inspect the brick surface for dirt, grime, mold, and mildew.
  • Use a pressure washer with a low-pressure setting (around 1200-1500 psi) to avoid damaging the bricks or mortar joints.
  • If using a stiff-bristle brush and soapy water instead of a pressure washer, mix mild detergent with warm water in a bucket.
  • Scrub the brick surface in circular motions, making sure to reach all corners and crevices.
  • Rinse thoroughly with clean water using either your pressure washer on its lowest setting or a garden hose.

Repair damage:

  • Carefully examine the brick surface for cracks, chips, loose mortar joints or any other damages.
  • Remove any loose debris from damaged areas using a chisel or scraper.
  • Mix mortar or patching compound according to manufacturer’s instructions and apply it evenly to fill gaps and cracks with a trowel.
  • Allow repairs to cure as directed by the product guidelines before proceeding.

Remove loose paint:

  • Identify areas where old paint is peeling or flaking off from the brick surface.
  • Use paint scrapers or wire brushes to remove loose paint chips gently without scratching bricks.
  • For stubborn spots that are hard-to-reach or require more effort, use medium-grit sandpaper attached to an orbital sander.

Sand rough edges:

  • Examine your bricks for protruding edges and uneven surfaces that can interfere with proper adhesion of primer and paint
  • Attach medium-grit sandpaper (80-120 grit) to an orbital sander if working on large areas
  • Sand down rough spots until they are smooth enough not cause snagging when running hand over them; be careful not over-sand as this can damage brick face
  • Wipe away dust created by sanding using a clean, damp cloth or a soft-bristle brush

Protect windows and fixtures:

  • Measure and cut plastic sheeting or drop cloths to cover doors, windows, vents, and other features.
  • Use painter’s tape to secure the protective materials in place along edges and seams without overlapping.
  • Additionally, wrap light fixtures, mailboxes, and other exterior accessories with plastic sheeting or aluminum foil for added protection.

Allow time for drying:

  • Monitor weather conditions during cleaning repairs process; avoid working during rain heavy humidity which can prolong drying times
  • Allow brick surface dry completely before applying primer; this typically takes at least 24 hours but may vary depending on factors like temperature airflowWith these steps completed correctly, you are now ready for priming your brick house and prep it for painting!


how to paint a house with primer
how to paint a house with primer

Now that your brick house is prepped and ready to go, it’s time to apply the primer. This will act as a glue between the paint layers, ensuring better adherence and longer lasting results overall.

Choose a suitable primer:

  • Research and select a high-quality masonry primer specifically formulated for brick surfaces to ensure proper adhesion, sealing, and moisture resistance.
  • Consult with paint professionals or read product reviews to determine the best primer for your specific project, considering factors such as weather conditions and brick type.

Apply evenly:

  • Stir the primer thoroughly before application to ensure even distribution of the ingredients.
  • Choose an appropriate tool for applying the primer: brush for detailed areas or tight corners, roller for larger flat surfaces or spray equipment for covering significant areas quickly.
  • Start at one corner of the house and work systematically in sections to maintain a wet edge and avoid lap marks.
  • Apply primer generously, ensuring all crevices, mortar joints, and any repaired spots are covered adequately.

Allow proper drying time:

  • Read the manufacturer’s instructions regarding drying times between coats of primer and before applying paint.
  • Be patient and allow each coat of primer to dry completely; rushing this process can lead to poor adhesion or peeling issues later on.
  • Keep in mind that drying times may vary depending on factors such as temperature, humidity, ventilation, and brick porosity.

Consider back-rolling:

  • If using a sprayer apply first coat lightly then immediately go over area again with paint roller
  • Press roller firmly against brick surface so it penetrates into crevices mortar joints
  • Back-rolling helps ensure better penetration proper coverage reducing chance air bubbles forming beneath film

Spot prime repairs:

  • Inspect prepared brick surface identify any repaired areas where cracks damages were filled patched
  • Use brush apply additional layer(s) thinly over these spots make sure they blend seamlessly surrounding region without creating thick build-up
  • Allowing spot-prime layers dry according manufacturer’s recommendations promotes uniform coverage final appearance.

Sanding Primer

  1. Choose the right sandpaper:
  • Select medium-grit sandpaper (120-150 grit) for initial sanding to smooth out rough spots or uneven areas on the primer.
  • Gradually move towards finer-grit sandpaper (180-220 grit) for final smoothing and achieving a more refined surface.

2. Use appropriate sanding tools:

  • For smaller projects or detailed areas, use hand-held sanding blocks or manual sanding pads.
  • For larger surfaces, consider using an orbital sander with variable speed settings to cover more area quickly and efficiently.

3. Apply even pressure while sanding:

  • Sand the primed surface with even strokes and consistent pressure to avoid creating scratches or gouges in the primer layer.
  • Focus on leveling high spots and smoothing out any visible brush marks, roller stipple, or spray patterns.

4. Work systematically across the brick surface:

  • Divide exterior wall into manageable sections work methodically from top bottom left right ensure thorough coverage
  • Pay special attention corners edges where excess primer build-up may occur.

5. Monitor progress continuously :

  • Periodically check surface by running fingers over sanded area feel if it’s smooth enough ready next coat
  • Use sufficient lighting during process identify imperfections that need further attention

6. Clean up after each stage of sanding :

  • Wipe away dust created throughout process using clean damp cloth soft-bristle brush vacuum cleaner equipped HEPA filter prevent airborne particles from affecting subsequent coats
  • Ensure completely dry before proceeding painting application steps

By following these guidelines when sanding primer on your brick house exterior, you’ll achieve a smoother finish that will allow better adhesion of paint layers and ultimately result in longer-lasting protection for your home’s facade


painting old brick house
painting old brick house

Now that the brick surface is primed and ready to go, it’s time to start painting. The key here is to choose a high-quality paint and use the right brush or roller for your job. Here are some tips on how to get great results:

1. Choose the right application method:


  • Ideal for detailed areas, tight corners, and mortar joints
  • Provides better control for precise paint application


  • Suitable for larger, flat surfaces and efficient coverage
  • Use medium-nap rollers (1/2 – 3/4 inch) to reach deeper crevices on rough brick surfaces


  • Airless or HVLP (High Volume Low Pressure) sprayers can be used for quick and even coverage of large brick exteriors
  • Consider back-rolling after spraying to ensure better penetration of paint into the brick surface

2.Prepare your painting tools:

  • Clean brushes, rollers, or spray equipment thoroughly before use to remove any dust or debris that could affect the paint finish.
  • Load brushes with an adequate amount of paint without overloading them; this prevents drips and helps achieve smooth strokes.

3. Apply paint systematically:

  • Work in sections moving from top to bottom left right maintain wet edge avoid lap marks or streaking
  • Start by cutting around windows doors other features using brush precision then fill remaining area roller sprayer efficiency

4. Allow proper drying time between coats :

  • Read manufacturer’s instructions regarding required times applying second coat may vary depending factors such temperature humidity ventilation
  • Be patient let each dry completely rushing can lead poor adhesion peeling issues later on

5 . Inspect apply additional coats needed :

  • After first has dried examine surface any missed spots uneven coverage areas requiring touch-ups
  • Apply second coat perpendicular direction previous one improve uniformity ; allow dry according guidelines

6 . Clean-up post-painting process :

  • Dispose leftover paints solvents accordance local regulations recycling centers hazardous waste facilities if necessary
  • Thoroughly clean brushes rollers spray equipment soap water store them properly future projects
  • Carefully remove painter’s tape plastic sheeting protective materials taking care not damage freshly painted surface

7 . Apply a protective sealant (optional) :

  • If desired consider using masonry sealer enhance durability water resistance finished brick exterior
  • Follow product recommendations apply evenly according manufacturer’s specifications ensure best performance

By following these detailed steps during the painting process, you’ll achieve a long-lasting, attractive finish on your brick house exterior that will provide protection and curb appeal for years to come.

Painting brick can be intimidating at first, but following these simple steps will help you achieve beautiful results that will enhance the look of your home.

With just a bit of patience and effort, you’ll be able to enjoy freshly painted bricks in no time – guaranteed!

Finishing Touches

finishing touches when you paint brick exterior
finishing touches when you paint brick exterior

The perfect house is like a work of art. Its beauty comes from the details – the trim, windows, and doors that frame it; the colors that bring out its best features or make it stand out among other homes on the block.

Painting a brick house requires careful attention to these finishing touches in order for an external transformation to take place.

In preparation for painting a brick home, one must first properly clean and prepare the surface. This includes washing down all exposed surfaces with mild detergent (water mixed with soap) and then rinsing off with clear water using a pressure washer if available.

Once dry, use painter’s tape along any areas you don’t want painted such as window frames, door frames and trim pieces. Then apply primer before moving onto your desired paint color(s).

When applying paint to brick walls, use quality latex-based exterior paints formulated specifically for masonry surfaces and applied according to manufacturer specifications.

For best results when coordinating colors between brick walls and trim pieces, select complementary tones rather than identical ones.

When complete, inspect your work carefully by stepping back far enough so as not to be distracted by minor flaws up close. As long as your eye can appreciate the overall look of the completed project you should be pleased with your efforts!


Painting a brick house is not as daunting of a task as it may initially seem. With the right materials, preparation and attention to detail, one can achieve stunning results with minimal effort.

The key to success lies in taking the time to do each step correctly: from priming and painting, all the way through to finishing touches like caulking and touch ups. For example, consider John Smith’s Victorian home in Anytown.

He was able to use his knowledge of proper painting techniques and tools such as sandpaper and paintbrushes, along with quality paints for optimal coverage, primer for better adhesion between surfaces, sealant for waterproofing bricks against future weather conditions – the list goes on!

After following these steps faithfully over several days’ worth of work, he was left with an exterior that looked brand new; truly a transformation worthy of admiration. In conclusion, anyone can successfully paint their brick house if they follow the necessary steps involved in doing so.

Taking your time with prep work and making sure you have adequate supplies will ensure that your finished project looks professional-grade without breaking the bank or sacrificing too much time.

We can help you establish if you need full service design or just advice. Free interior design consultant >